509 Fabrication 509-1 OPTIMUM Owner's Operation Manual - Page 14

Browse online or download pdf Owner's Operation Manual for Stove 509 Fabrication 509-1 OPTIMUM. 509 Fabrication 509-1 OPTIMUM 19 pages.

Print Page

Maintenance

1. Normal cleaning should be all that is necessary. Make sure to clean the radiant heat tubes with the scraper rod and wrench handle every day.

This is a 30 second procedure.

One time a year the Lower Combustion motor should be removed and cleaned. The blades will have buildup on them from regular burning. This

buildup needs to be removed and cleaned by a professional and the motor re-installed, making sure all nut fasteners and lock washers are used for

re-install and tightened down securely. Do not over-tighten the nuts. If the gasket is damaged, it should be replaced to prevent air leaks.

With the combustion motor removed, inspect your chimney pipe inspected for debris, and have it cleaned by a professional at this time if needed.

When it is re-installed make sure that all connections are re-sealed and secure.

BACK - EXPLODED ISO VIEW

5091-147

DAMPER - EXPLODED ISO VIEW

5091-909S

Washer Lock .250

Washer Flat .250

Washer Lock .250

NUT HEX .250-20

5091-912

Washer Flat .250

Washer Lock .250

NUT HEX .250-20

5091-171

socket head cap screw

Washer Flat .190

Washer Lock .190

5091-148

5091-157

NUT HEX .250-20

5091-154

CR-RHMS .25-20 x .50

CR-PHMS .138-32 x .25

5091-216

Washer Flat .190

5091-155