Dymo RhinoPRO 3000 Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Label Maker Dymo RhinoPRO 3000. Dymo RhinoPRO 3000 17 pages. Label printer
Also for Dymo RhinoPRO 3000: Brochure & Specs (2 pages), Datasheet (2 pages), Quick Start (2 pages), Quick Reference (2 pages)

Print Page

You can specify a fixed length for a label in 0.1"

(2 mm) increments between 1.5" (40 mm) and

25.0" (650 mm). The preset fixed length is 1.5"

(40 mm). Any change you make to the fixed length

setting remains in effect until you change it.

To set the label length

1. Press

FIXED

2. Use the arrow keys to select the label length and

press

3. Enter the text for the label and press

If multiple copies of a fixed-length label are

printed, cut marks are printed between each label.

Cut Marks

MEDIA ROOM

1.9" (50 mm)

Figure 11

Printing Distribution Panel Labels

Distribution panel mode allows you to create a

label that contains boxes of information for labeling

multiple items in one location; for example, a

number of ports on a distribution panel. You define

the number of boxes to label, set the length and

enter the text for each box, and then print. The

result is a long label with correctly spaced boxes of

text for each port.

01 | 02 | 03 | 04

To print a distribution panel label

1. Press

PANEL

2. Enter the number of boxes and press

3. Select the length of the boxes and press

default length is 1.5" (40 mm).

4. Select 1 or 2 lines of text, and press

MEDIA ROOM

1.9" (50 mm)

. The

5. Enter the text for the first box and press

If you selected two lines of text, the display

shows TextBox01Row2 indicating row 2 of box 1.

6. Enter the text for the second line and press

The text for this box automatically prints and you

are ready to enter text for the next box.

7. Repeat steps 5 and 6 until all boxes are printed.

Printing Vertical Labels

Labels can be printed with the text

running vertically. For two-line labels,

the second line prints directly below the

first line, separated by a space.

To print vertically

1. Press

VERT

2. Enter the text for your label and press

Using the Pre-defined Text Keys

Your printer includes four Hot Keys that allow you

to access pre-defined text. These Hot Keys include

Location, Audio/Video, Voice/Data, and Security.

To add text to a label

1. Press one of the text Hot Keys.

2. Select the label text using one of the following

methods:

3. Use the arrow keys to scroll through the list.

4. Press the first letter of the text label you wish to

use. The cursor jumps to the first label that

begins with that letter.

5. Press

to insert the text on the label.

The pre-defined text available on each Hot Key is

shown on the next page.