Dymo RhinoPRO 3000 Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Виробник етикеток Dymo RhinoPRO 3000. Dymo RhinoPRO 3000 17 сторінок. Label printer
Також для Dymo RhinoPRO 3000: Брошура та технічні характеристики (2 сторінок), Технічний паспорт (2 сторінок), Швидкий старт (2 сторінок), Короткий довідник (2 сторінок)
Друкувати сторінку
You can specify a fixed length for a label in 0.1"
(2 mm) increments between 1.5" (40 mm) and
25.0" (650 mm). The preset fixed length is 1.5"
(40 mm). Any change you make to the fixed length
setting remains in effect until you change it.
To set the label length
1. Press
.
FIXED
2. Use the arrow keys to select the label length and
press
.
3. Enter the text for the label and press
If multiple copies of a fixed-length label are
printed, cut marks are printed between each label.
Cut Marks
MEDIA ROOM
1.9" (50 mm)
Figure 11
Printing Distribution Panel Labels
Distribution panel mode allows you to create a
label that contains boxes of information for labeling
multiple items in one location; for example, a
number of ports on a distribution panel. You define
the number of boxes to label, set the length and
enter the text for each box, and then print. The
result is a long label with correctly spaced boxes of
text for each port.
01 | 02 | 03 | 04
To print a distribution panel label
1. Press
.
PANEL
2. Enter the number of boxes and press
3. Select the length of the boxes and press
default length is 1.5" (40 mm).
4. Select 1 or 2 lines of text, and press
.
MEDIA ROOM
1.9" (50 mm)
.
. The
.
5. Enter the text for the first box and press
If you selected two lines of text, the display
shows TextBox01Row2 indicating row 2 of box 1.
6. Enter the text for the second line and press
The text for this box automatically prints and you
are ready to enter text for the next box.
7. Repeat steps 5 and 6 until all boxes are printed.
Printing Vertical Labels
Labels can be printed with the text
running vertically. For two-line labels,
the second line prints directly below the
first line, separated by a space.
To print vertically
1. Press
.
VERT
2. Enter the text for your label and press
Using the Pre-defined Text Keys
Your printer includes four Hot Keys that allow you
to access pre-defined text. These Hot Keys include
Location, Audio/Video, Voice/Data, and Security.
To add text to a label
1. Press one of the text Hot Keys.
2. Select the label text using one of the following
methods:
3. Use the arrow keys to scroll through the list.
4. Press the first letter of the text label you wish to
use. The cursor jumps to the first label that
begins with that letter.
5. Press
to insert the text on the label.
The pre-defined text available on each Hot Key is
shown on the next page.
.
.
P
A
N
E
L
1
.
9