Dymo LabelWriter 400 Duo Guide Setup Manual - Page 2
Browse online or download pdf Setup Manual for Software Dymo LabelWriter 400 Duo Guide. Dymo LabelWriter 400 Duo Guide 11 pages. Desktop/pc connected labelmaker
Also for Dymo LabelWriter 400 Duo Guide: Instructions For Use Manual (13 pages), Setting Up (8 pages), Brochure (2 pages), Quick Reference Manual (8 pages), Brochure & Specs (2 pages), Contents And Installation (4 pages)
Print Page
- 1. Setting up a Dymo Labelwriter
- 2. To Install the DYMO Label Software on the Terminal Server
- 3. To Install and Test the DYMO Printer on the Local Workstation
- 4. To Allow Your Local USB Port to be Available During a Terminal Server Session
- 5. To Test the DYMO Printer through a Terminal Server Session
2
Setting Up a DYMO LabelWriter 400, 450, or 450 Turbo Printer with Terminal Services
The instructions in this document pertain only to the DYMO
•
NOTES
LabelWriter 400, 450, and 450 Turbo printers. Eyefinity does not
support the use of any other DYMO equipment.
You cannot use a DYMO printer in all Terminal Services or cloud
•
computing environments. A DYMO printer cannot print a job sent
from an outside network. For example, a DYMO printer will not print
jobs sent from the World Wide Web. However, if set up correctly, a
DYMO printer can prints jobs that are sent from a VPN or a local
network.
DYMO does not directly support Windows Terminal Services. More
•
information can be found on DYMO's Web site at
http://sites.dymo.com/Search/Pages/SupportSearchResults.aspx?
k=Terminal
For more information about DYMO printers, go to the DYMO Web
•
site at http://www.dymo.com/.
Depending on the policies of your network, local serial port
•
mapping might be disabled for some or all remote connections.
You might see a security warning message asking if you want to
•
connect your local disk drives, local ports, or smart card to the
remote computer. To enable one or more of these connections,
select the appropriate check boxes. If you choose not to enable
these connections, a remote connection is still established, but
these resources are not available to the remote computer.
•
Microsoft Remote Desktop Connection 6 (or later) must be installed
on the local computer in order to use Terminal Services. Information
about Remote Desktop Connection can be found on Microsoft's
Web site at http://support.microsoft.com/kb/925876/en-us.
Setting Up a DYMO LabelWriter 400, 450, or 450 Turbo Printer with Terminal Services
server.