Dyna Lec 65032-300 Instruction Sheet - Page 4

Browse online or download pdf Instruction Sheet for Telephone Dyna Lec 65032-300. Dyna Lec 65032-300 7 pages. Weather-proof analog phone

Print Page

3.2

J2 Ancillary Device Connector

This connector is the interface between the terminal and the ancillary device. The terminal is capable of supporting

either an H-319/U handset or an H-320/U headset. The connections are as follows:

Pin A : Microphone + input

Pin B : Microphone - input

Pin C : PTT signal (switched to the RETURN pin inside the ancillary device)

Pin D : RETURN (for both Headphone output and PTT signal)

Pin E : Headphone output

Pin H : Ancillary device cable shield

3.3

J3 Ancillary Device Connector

This connector is the interface between the terminal and an LS-613 or LS-614 Intercommunication Unit. The

terminal is capable of providing the power and supporting the signaling on either of these units. The connections

are as follows: