Active Products ZE02 Manual - Page 11
Browse online or download pdf Manual for Pressure Washer Active Products ZE02. Active Products ZE02 18 pages.
Print PageWORKING WITH DETERGENTS
Using the detergent
To enhance the efficiency of the pressure washer,
sometimes it is necessary to use detergents to help
loosen tough dirt and grime.
CAUTION
This machine has been designed for use
with pressure washer detergents only. The
use of other detergents or chemicals may
affect the operation of the machine and will
void the warranty.
Note: To apply detergent, the adjustable nozzle
must be in the low-pressure position.
Detergent Application
Fig. 11
Step 1
Pull the detergent suction tube out and insert it
into a detergent container.
Step 2
Adjust the nozzle to low-pressure setting to
apply the detergent.
Step 3
Depress the gun trigger and the detergent will
be automatically injected and mixed with water.
Step 4
Apply detergent to work area. Do not allow
detergent to dry on surface.
Step 5
Release the gun trigger and adjust nozzle to
high pressure setting. Depress the gun trigger
and rinse the surface in a sweeping motion.
Important notice
When you have finished using detergent, always
follow the "Cleanup Instructions". Failure to clean
properly will cause the injection system to become
clogged and inoperable.
CAUTION
• Never use bleach, chlorine products and
other corrosive chemicals.
• Never use liquids containing solvents (i.e.,
paint thinners, gasoline, oils).
• Never use ammonia products.
• Never use acid-based products.
These products can cause physical injuries
to the operator and irreversible damage to
the machine and/or damage the surface
being cleaned.
Cleaning Instructions
Step 1
Insert the detergent suction tube into a con-
tainer of fresh water.
Step 2
Set the nozzle to the low-pressure setting.
Step 3
Pull and hold the gun trigger for 20~30 sec-
onds. Allow fresh water to rinse through the
detergent injection system.
9