Gage Bilt GB7624 Installations - Page 9

Browse online or download pdf Installations for Rivet Tools Gage Bilt GB7624. Gage Bilt GB7624 9 pages. Hydraulic tool
Also for Gage Bilt GB7624: Original Instructions Manual (20 pages)

Print Page

HIGH TENSILE PULL TYPE

BLIND OVERSIZE MANDREL

C50L® AND BOM ® ARE REGISTERED TRADEM ARKS OF ALCOA INC.

GAGE BILT CERTIFIES THE GB7624 WILL INSTALL THE ABOVE FASTENERS

NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE

TEFLON® IS A REGISTERED TRADEMARK OF E.I. DUPONT DE NEMOURS CO. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING CO. LOCTITE® IS A REGISTERED

TRADEMARK OF HENKEL CORPORATION.

S/N: 1140 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

GB7624 SELECTION CHART

FASTENER

DIA. NOSE ASSEMBLY

LOCKBOLT

5/8"

3/4"

C50L®

5/8"

BOM®

3/4"

5/8"

HP8

3/4"

HP10.9

16mm

ASSEMBLY EXTENDS FROM THE TOOL. (I.e. -25 = 2.5 inches)

Seller warrants that all goods covered by this catalog will conform

to applicable specifications and will replace or repair, F.O.B. our plant, any

goods providing defective from faulty workmanship, or material, for 6

months from date of shipment

Said warranty to remain in effect if, and only if, such goods are

used in accordance with all instructions as to maintenance, operation and

use, set forth in manuals and instruction sheets furnished by seller.

Sellers obligation under this warranty shall be limited to the repair

or rework of the goods supplied or replacement thereof, at Seller's option,

and in no case is to exceed the invoice value of said goods. Under no

circumstances will the seller be liable for incidental or consequential

damages or for damages incurred by the buyer or subsequent user in

repairing or replacing defective goods or if the goods covered by this

warranty are reworked or subjected to any type of additional processing.

This warranty is void if Seller is not notified in writing of any

rejections or defects within 6 months after the receipt of the material by the

customer.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES

EXPRESSED OR IMPLIED, INCLUDING MERCHANTABILITY.

HYDRAULIC PRESSURE REQUIRED

PULL PSI

20-585-41

6200-6400

24-585-46

8800-9200

BOM20-585-41

6200-6400

BOM24-585-46

8800-9200

CONTACT GAGE BILT FOR YOUR REQUIREMENTS

WARRANTY

RETURN PSI

3600-3800

5600-6000

3600-3800

5600-6000

Rev. 2/15

Rev. 12/14