Daxten Voyager 100 User And Installation Manual - Page 10

Browse online or download pdf User And Installation Manual for Extender Daxten Voyager 100. Daxten Voyager 100 16 pages. Keyboard, video & mouse extender
Also for Daxten Voyager 100: Installation Manual (8 pages), Brochure (2 pages)

Print Page

CONNECTING UP

The Quick system guide illustrates how the units are interconnected

1. Switch off your PC

2. Connect the local Voyager, keyboard, monitor and mouse as shown in the

appropriate diagram (page 8). You can use the local without mouse, keyboard

and monitor.

3. Connect the UTP cable between the local and remote

4. Connect the mouse keyboard and monitor to the remote.

5. Power up the Remote Unit by connecting the supplied mains adapter and

switching it on.

6. Power on your PC and operating system

7. Check keyboard operates correctly.

8. Check that the mouse functions works right

9. The Remote Unit contains video equalisation circuitry that compensates for loss

in image quality experienced when driving over long cables.

To set the correct level of equalisation there is an adjustment wheel on the rear

side of the remote unit. Select an adjust the range appropriate to the cable length

(these only need to be set once.)

UTP in

Cable Length (m) Switch Position

0 – 30 m

30-50 m

50-70 m

70-100 m

The remote unit (when installed in its final location) may be left permanently powered

up.

Please note that for all practical purposes cable equalisation cannot be exact - the

remote image will never be as sharp as the original. The Voyager's equalisation

system is designed so that is produces very good results on short to medium length

cables and an acceptable quality over longer cables (> 100m/330ft).

VGA out

Voyager 100 turning Switch

Cable Length (ft)

0-100 ft

100-150 ft

150-230 ft

230-330 ft

4 5 6 7 8 9

230-330 ft

Cable Length distance Setting

5 V DC

Switch Position

4 5 6 7 8 9