Daxten Voyager 100 User And Installation Manual - Page 13

Browse online or download pdf User And Installation Manual for Extender Daxten Voyager 100. Daxten Voyager 100 16 pages. Keyboard, video & mouse extender
Also for Daxten Voyager 100: Installation Manual (8 pages), Brochure (2 pages)

Print Page

• Video only required, but no picture appears

a) The Local Unit must be connected to a power supply or PC keyboard port.

b) Consult technical support if you cannot do this and require a secondary power supply

for the Local Unit.

• A constant vertical wobble appears down the screen (interference).

a) The interconnection cable could be located too close to a source of very strong mains

borne interference, re-route cabling if possible

If interference is from strong signals from a nearby broadcast transmitter a beat pattern

will appear. Change the vertical refresh rates slightly, such as from 60Hz to 70Hz.

• Video Picture is black and white not colour

a) The problem could be Monitor ID.

b) If your graphics card supports VESA DDC (Display Data Channel) configure the

graphics driver by explicitly telling it make and model of monitor you have rather

than using DDC.

• Video Resolution goes low when connecting trough Voyager

a) Video resolution is lower than the resolution adjusted on the video card, when

connecting through the voyager.

. The ID negotiation is not transferred over the UTP. Select monitor size and driver

manually in the OS. The switch down trick is performed by the VGA adapter to

secure the CRT is not destroyed at to high resolutions.

GENERAL QUESTIONS

• Is it possible to use a cable length of more than 100m?

The Voyager has been designed to produce acceptable results with Super VGA

resolutions at the maximum cable length. It may be possible to run up to 500 meters

using Galaxy TX1 Repeater or using voyager a Voyager 300 product.

• Can Voyager units be chained to allow operation over more than 200m/600ft?

Daisy chain gives delay on mouse and keyboard functions and equalisers is required. If

you plan to cascade units, please contact technical support to discuss your application.

• Can I add several working spots to one PC ?

Yes use one USB/PS2 converter for every local. The local units will obtain their own

HID number from the OS. Please remark USB dongel behave different and might not

work with the OS or the local unit. please contact technical support to discuss your

application.

• Which cable is better UTP or STP?

UTP cable will give the best quality video over long distances because it has less

capacitance per unit length. However, STP may be a better choice in electrically noisy

environments.