Daxten Voyager 100 Посібник з експлуатації та встановлення - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Подовжувач Daxten Voyager 100. Daxten Voyager 100 16 сторінок. Keyboard, video & mouse extender
Також для Daxten Voyager 100: Посібник з монтажу (8 сторінок), Брошура (2 сторінок)
Друкувати сторінку• Video only required, but no picture appears
a) The Local Unit must be connected to a power supply or PC keyboard port.
b) Consult technical support if you cannot do this and require a secondary power supply
for the Local Unit.
• A constant vertical wobble appears down the screen (interference).
a) The interconnection cable could be located too close to a source of very strong mains
borne interference, re-route cabling if possible
If interference is from strong signals from a nearby broadcast transmitter a beat pattern
will appear. Change the vertical refresh rates slightly, such as from 60Hz to 70Hz.
• Video Picture is black and white not colour
a) The problem could be Monitor ID.
b) If your graphics card supports VESA DDC (Display Data Channel) configure the
graphics driver by explicitly telling it make and model of monitor you have rather
than using DDC.
• Video Resolution goes low when connecting trough Voyager
a) Video resolution is lower than the resolution adjusted on the video card, when
connecting through the voyager.
. The ID negotiation is not transferred over the UTP. Select monitor size and driver
manually in the OS. The switch down trick is performed by the VGA adapter to
secure the CRT is not destroyed at to high resolutions.
GENERAL QUESTIONS
• Is it possible to use a cable length of more than 100m?
The Voyager has been designed to produce acceptable results with Super VGA
resolutions at the maximum cable length. It may be possible to run up to 500 meters
using Galaxy TX1 Repeater or using voyager a Voyager 300 product.
• Can Voyager units be chained to allow operation over more than 200m/600ft?
Daisy chain gives delay on mouse and keyboard functions and equalisers is required. If
you plan to cascade units, please contact technical support to discuss your application.
• Can I add several working spots to one PC ?
Yes use one USB/PS2 converter for every local. The local units will obtain their own
HID number from the OS. Please remark USB dongel behave different and might not
work with the OS or the local unit. please contact technical support to discuss your
application.
• Which cable is better UTP or STP?
UTP cable will give the best quality video over long distances because it has less
capacitance per unit length. However, STP may be a better choice in electrically noisy
environments.
13