GREAT PLAINS 1205NT Predelivery Manual - Page 11

Browse online or download pdf Predelivery Manual for Farm Equipment GREAT PLAINS 1205NT. GREAT PLAINS 1205NT 20 pages. End wheel no-till drill
Also for GREAT PLAINS 1205NT: Field Adjustment Manual (5 pages)

Print Page

Assembly

The following headings are step-by-step instruc-

tions for assembling the 1205NT Drill. Begin with

"Tools Required" and "Pre-Assembly Checklist" to

make sure you have all necessary parts and

equipment. Follow each step to make the job as

quick and safe as possible and produce a properly

working machine.

The 1205NT Drill is shipped via ﬂat bed truck. It is

the dealer's responsibility to unload the new ma-

chine. Unload all equipment before beginning

assembly. Do not attempt any assembly work

while the 1205NT Drill is on the truck.

Tools Required

•

Fork lift, overhead hoist, or loader

•

General hand tools

Pre-Assembly Checklist

1. Before assembling, read and understand "Im-

portant Safety Information," beginning on

page 1.

2. Have at least two people on hand while as-

sembling.

3. Make sure assembly area is level and free of

obstructions (preferably an open concrete ar-

ea).

4. Have all major components.

5. Have all fasteners and pins shipped with the

drill.

IMPORTANT: If a pre-assembled part or fas-

tener is temporarily removed, remember

where it goes. Keep the parts separated.

6. Have a copy of the parts manual on hand. If

unsure of proper placement or use of any part

or fastener, refer to the parts manual.

7. Check that all working parts are moving free-

ly, bolts are tight, and cotter pins are spread.

8. Check for proper tension and alignment on all

drive chains.

3/24/06

Assembly

150-131Q