GREAT PLAINS 1205NT Predelivery Manual - Page 5

Browse online or download pdf Predelivery Manual for Farm Equipment GREAT PLAINS 1205NT. GREAT PLAINS 1205NT 20 pages. End wheel no-till drill
Also for GREAT PLAINS 1205NT: Field Adjustment Manual (5 pages)

Print Page

Transport Machinery Safely

Maximum transport speed for implement is 20

mph. Some rough terrains require a slower

speed. Sudden braking can cause a towed load to

swerve and upset.

Do not exceed 20 mph. Never travel at a

speed which does not allow adequate control

of steering and stopping. Reduce speed if

towed load is not equipped with brakes.

Comply with state and local laws.

Do not tow an implement that, when fully

loaded, weighs more than 1.5 times the weight

of towing vehicle.

Carry reﬂectors or ﬂags to mark drill in case of

breakdown on the road.

Keep clear of overhead power lines and other

obstructions when transporting. Refer to trans-

port dimensions under "Speciﬁcations and

Capacities," in your operator's manual.

Avoid High Pressure Fluids

Escaping ﬂuid under pressure can penetrate the

skin, causing serious injury.

Avoid the hazard by relieving pressure before

disconnecting hydraulic lines.

Use a piece of paper or cardboard, NOT

BODY PARTS, to check for suspected leaks.

Wear protective gloves and safety glasses or

goggles when working with hydraulic systems.

If an accident occurs, see a doctor immedi-

ately. Any ﬂuid injected into the skin must be

surgically removed within a few hours or gan-

grene may result.

3/24/06

Important Safety Information

150-131Q