GREAT PLAINS 1205NT Teslimat Öncesi El Kitabı - Sayfa 5

Çiftlik Ekipmanları GREAT PLAINS 1205NT için çevrimiçi göz atın veya pdf Teslimat Öncesi El Kitabı indirin. GREAT PLAINS 1205NT 20 sayfaları. End wheel no-till drill
Ayrıca GREAT PLAINS 1205NT için: Saha Ayarlama Kılavuzu (5 sayfalar)

Sayfayı Yazdır
Transport Machinery Safely
Maximum transport speed for implement is 20
mph. Some rough terrains require a slower
speed. Sudden braking can cause a towed load to
swerve and upset.
Do not exceed 20 mph. Never travel at a
speed which does not allow adequate control
of steering and stopping. Reduce speed if
towed load is not equipped with brakes.
Comply with state and local laws.
Do not tow an implement that, when fully
loaded, weighs more than 1.5 times the weight
of towing vehicle.
Carry reflectors or flags to mark drill in case of
breakdown on the road.
Keep clear of overhead power lines and other
obstructions when transporting. Refer to trans-
port dimensions under "Specifications and
Capacities," in your operator's manual.
Avoid High Pressure Fluids
Escaping fluid under pressure can penetrate the
skin, causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.
Use a piece of paper or cardboard, NOT
BODY PARTS, to check for suspected leaks.
Wear protective gloves and safety glasses or
goggles when working with hydraulic systems.
If an accident occurs, see a doctor immedi-
ately. Any fluid injected into the skin must be
surgically removed within a few hours or gan-
grene may result.
3/24/06
Important Safety Information
3
150-131Q