Aircraft Automation ECOTRIM Pilot's Manual - Page 17

Browse online or download pdf Pilot's Manual for Autopilot System Aircraft Automation ECOTRIM. Aircraft Automation ECOTRIM 18 pages. Trim system

Aircraft Automation

5 REVERSING SERVO DIRECTION

5.1

ROLL SERVO DIRECTION

The only setting that can be done in the ECOTRIM is reversing the servo direction.
Find a ½ in plastic plug at the rear of the controller. Remove the plug and you will see
two very small dip switches:
Rotate the knob to trim the airplane to the right, Check the following
If the trim tab is installed on the left-wing aileron: Trim should be moving UP for
-
If the trim tab is installed on the right-wing aileron: Trim should be moving DOWN
-
If the above is inverted, then flick dip switch number 1 as shown in the figure.
Direction can also be inverted by installing a PWM servo signal reverser cable in series
with the servo extension.
17 |
P a g e
ECOTRIM Trim System