Aircraft Automation ECOTRIM Pilot's Manual - Page 9

Browse online or download pdf Pilot's Manual for Autopilot System Aircraft Automation ECOTRIM. Aircraft Automation ECOTRIM 18 pages. Trim system

Print Page
Aircraft Automation
2.3

Normal daily operation recommended sequence

This is an example of operation on a flight, from take-off to landing. It is a sample sequence
that will help you understand TRIM operation:
DURING ENGINE WARMUP ON GROUND
1. Push red knobs ONCE to center trim tabs.
IN FLIGHT
1. Rotate the horizontal red knob to adjust roll trim. Pulsating the hat switch right or
left will do small adjustments to roll trim.
2. Rotate the vertical red knob to adjust pitch trim. Pulsating the hat switch forward
and back will do small adjustments to pitch trim.
3. Press horizontal push knob for three consecutive seconds to activate yaw. Rotate
the horizontal red knob to adjust yaw trim. Pulsating the hat switch right or left
will do small adjustments to pitch trim. CLICK ONCE ON THE KNOB TO RETURN TO
ROLL ADJUSTMENTS.
4.
Click on the Joystick once to fly your plane using the black joystick. CLICK ON ANY
RED KNOB TO GO BACK TO NORMAL TRIM OPERATIONS.
AT DESTINATION
1.
Press each knob ONCE to center trim tabs. Yaw cannot be centered by clicking on
the knob.
9 |
P a g e
ECOTRIM Trim System