Aircraft Automation ECOTRIM Pilot's Manual - Page 8

Browse online or download pdf Pilot's Manual for Autopilot System Aircraft Automation ECOTRIM. Aircraft Automation ECOTRIM 18 pages. Trim system

Print Page
Aircraft Automation
2

Pre-Flight procedures

2.1

Pre-flight checks

It is very important to include the following in your 360 pre-flight checks:
-
Turn on the ECOTRIM controller and servos.
-
Check each trim tab integrity and connection to servo.
-
Check each trim tab servo is active by excising a small pressure on the trim tab.
It should maintain its position.
-
Trim tabs should now be in the neutral position.
2.2

Before your first ECOTRIM Flight

Make sure your SERVO KILL SWITCH is installed, connected, and tested. THIS SWITCH SHOULD
ALWAYS BE ON, EVEN FOR TAKE OFF AND LANDINGS. This switch is only used for emergency
disconnect in case of servo runaway.
8 |
P a g e
ECOTRIM Trim System