Aircraft Automation ECOTRIM Podręcznik pilota - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik pilota dla System autopilota Aircraft Automation ECOTRIM. Aircraft Automation ECOTRIM 18 stron. Trim system
Drukuj stronęAircraft Automation
2
Pre-Flight procedures
2.1
Pre-flight checks
It is very important to include the following in your 360 pre-flight checks:
-
Turn on the ECOTRIM controller and servos.
-
Check each trim tab integrity and connection to servo.
-
Check each trim tab servo is active by excising a small pressure on the trim tab.
It should maintain its position.
-
Trim tabs should now be in the neutral position.
2.2
Before your first ECOTRIM Flight
Make sure your SERVO KILL SWITCH is installed, connected, and tested. THIS SWITCH SHOULD
ALWAYS BE ON, EVEN FOR TAKE OFF AND LANDINGS. This switch is only used for emergency
disconnect in case of servo runaway.
8 |
P a g e
ECOTRIM Trim System