Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT Instructions Manual - Page 7
Browse online or download pdf Instructions Manual for Toy Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT. Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT 20 pages. 1:72 mixed-media kit of the dc-10-30 second generation jet airliner
Print Page
(4) Make the NLG and CLG bay parts.
(a) For the NLG cut out these parts from the .080"/2 mm plastic
sheet supplied:
-
Roof panel - 50 mm x 22 mm
-
Two side panels, each 50 mm x 20 mm
-
Front and rear bulkheads to the shape shown below.
22
(b) For the CLG cut out these parts from the .080"/2 mm plastic
sheet supplied:
-
Roof panel - 50 mm x 22 mm
-
Two side panels, each 50 mm x 20 mm
-
Front and rear bulkheads to the shapes shown below.
18
(5) Cut off the centre engine intake. Also use the resin bypass duct
halves as templates cut away the rear fuselage until the resin
parts fit well as shown in the sketch below.
(6) Put half the thickness of the keel into one fuselage half and
cement it in place with liquid polystyrene cement.
(7)
File the edge of the fuselage keel to the internal radius of the
opposite fuselage half.
All dimensions in millimeters.
Skech not to scale.
Profile to suit fuselage curvature.
All dimensions in millimeters.
Skech not to scale.
Profile to suit fuselage curvature.