GREAT PLANES Tori Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Aircrafts GREAT PLANES Tori. GREAT PLANES Tori 20 pages.

Print Page

❏

8. Insert a T-pin into the front of the wing centered between

the two adjoining ribs. Loop the string over the T-pin.

A = A

B = B

❏

9. Pull the string back to one end of the stab. Slide the

masking tape along the string until the line is even with the

trailing edge of the stab.

❏

10. Swing the string over to same spot on the other side

of the stab. Adjust the stab and the tape on the string until

the stab is "equalized" and rotationally centered.

❏

11. Remove the stab. Glue the stab into position with

30-minute epoxy using the pin and string to check alignment

as done in the previous steps. A couple extra T-pins may be

inserted through the stab and into the balsa saddle to tightly

hold everything in position until the epoxy hardens.

❏

12. After the epoxy from the previous step has hardened

and the T-pins removed, any visible pinholes may be

reduced by going over them with your sealing iron.

❏

13. Use thin or medium CA glue to attach the tail skid.