GREAT PLANES Tori Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Aircrafts GREAT PLANES Tori. GREAT PLANES Tori 20 pages.

Print Page

❏

8. Fit, then glue the top portion of the pushrod brace into

position all the way up against the "lip" around the wing

saddle—it isn't critical where the brace is located forward

and aft—where it fi ts best is fi ne. Make sure the brace doesn't

interfere with the exit holes of the aileron servo leads.

❏

9. Center the plastic tubes in the brace, then add and

glue the bottom portion of the pushrod brace and the tubes

into place.

❏

10. Connect the servos to your receiver and power up the

radio with the transmitter. With the servos centered, adjust

the servo arms on the pushrods so they are perpendicular

to the servo arms. Fasten the servo arms to the servos with

the screws that came with them.

❏

11. Still with the radio on, hold the rudder and elevator

centered and tighten the pushrods in the screw-lock

connectors with the M2x3 Phillips screws and a drop of

threadlocker on the threads.

We'll fi nish radio installation after the motor has

been installed.

Install the Motor

❏

1. On the RimFire .10 use a 1.5mm hex driver to loosen

the set screw in the collar and remove the collar. (If ever

using the motor in a reverse confi guration in the future, be

certain to reinstall the collar.)