DaytonAudio KAB-2150 User Manual - Page 10
Browse online or download pdf User Manual for Amplifier DaytonAudio KAB-2150. DaytonAudio KAB-2150 17 pages. 2 x 150w class d bluetooth 5.0 amplifier board with tone and volume controls
Print Page
5.
External Power status (J6) and Bluetooth Status
LEDs (J5) can be added to the amplifier by
External
connecting the included LEDs to their
LED
corresponding ports.
Connection
(Optional)
The
Power LED
The
Bluetooth LED
not connected to a Bluetooth source. The LED will
be solid when connected.
A 3.5mm jack comes included in the functional
6.
cable pack, which can be plugged into J102 or
Input Jack
J103 to function as a line input for external audio
(Optional)
sources. See the "input devices" section above for
details about which port to use.
Note that J103 for Bluetooth Mode Line in uses
automatic detection. This means that when you
attach a cable to J103's aux jack, BT streaming will
disconnect and it will switch to the J103 BT Line
Input. To continue with Bluetooth streaming,
remove your audio source's cable from the jack. If
you do not have a jack connected, make sure to
replace the jumper that came in the port
originally.
will be solid when the board is on.
will blink when the amplifier is
10