DaytonAudio KAB-2150 User Manual - Page 11
Browse online or download pdf User Manual for Amplifier DaytonAudio KAB-2150. DaytonAudio KAB-2150 17 pages. 2 x 150w class d bluetooth 5.0 amplifier board with tone and volume controls
Print Page
Insert a standby switch into J9 to control the
status of the amplifier. This switch should not be a
7.
momentary style switch.
Standby
(Optional)
This port functions such that when the "EN" pin is
shorted to the "GND" pin, the amplifier will go
into standby. When these pins are not shorted,
the device will remain on.
8.
The KAB-2150 offers three ports for
potentiometers (included). These will control
Potentiome
Master Volume, a Bass Filter and a Treble filter
ters
when plugged in.
(Volume,
Bass,
In the next section, you can find graphical results
Treble)
of these filters. The bass knob is a peaking filter
(Optional)
centered at 100Hz, and the treble knob is a
peaking filter centered at 5000Hz. They both have
a range of about -5dB to +5dB.
Volume will be maximized if the control is not
present. Bass and Treble will be 'flat' if there is no
potentiometer connected.
These controls only work if the amp is in
"Bluetooth Module Mode" and will control the
tone of the Bluetooth Audio Signal, the Bluetooth
mode line input, and the analog line output.
These controls DO NOT work in Bluetooth Module
Bypass Mode
11