Dynamic Engineering PCIe 8L XMC X1 User Manual - Page 7
Browse online or download pdf User Manual for PCI Card Dynamic Engineering PCIe 8L XMC X1. Dynamic Engineering PCIe 8L XMC X1 14 pages. Pcie 8 lane xmc compatible carrier
Print PageDipSwitch Settings
Switch 1: Global Address Settings
Position 1-3 corresponds to XMC GA0-2. When closed the signal is '0'. When open the
signal is '1'.
Position 4 corresponds to XMC-MVR0. When closed the signal is '0'. When open the
signal is '1'.
Position 5-8 are spare
Options
Dynamic Engineering offers multiple versions of the PCIe8LXMCX1design.
In addition to the basic passive design there are options for Ethernet, Fan, Serial ports,
and minimization.
The PCIe8LXMCX1 features cooling cutouts designed to support the addition of a fan in
one or two positions for each XMC. On PrXMC's and other XMC's with high thermal
loads the fan option is a good idea. On cards with a lower thermal profile the fan is not
needed. The fan produces 5 CFM in a small area to create a high LFM rating suitable
for most cooling requirements. The fan used has a relatively low noise rating for quiet
operation. Position 1 is closest to the PCI bezel and position 2 is closer to the XMC
connectors.
In addition the PCIe8LXMCX1 has two options for Pn4 signal routing. VME style 2x32
pin header [shown] or a SCSI style connector.
Please mix and match options, as you need them.
Embedded Solutions
Page 7