Automile Tracker Standard User Manual - Page 5

Browse online or download pdf User Manual for GPS Automile Tracker Standard. Automile Tracker Standard 7 pages.

Print Page

ENGLISH

Download the mobile app

If the tracker was ordered from

automile.com

need to register it. Just visit Google Play or Apple App

Store to download the Automile app (fig. 1).

Login / Create a new account

Open the app and fill in your email address or mobile

phone number (fig. 2). If you enter an email address that

our system doesn't recognize we will ask for your phone

number. A one-time passcode will be sent, ensuring a

faster and more secure registration process compared

to custom passwords. If we find that the provided phone

number is being used by an existing account you can

procedure reduces duplicate accounts.

When creating a new account, select Automile Tracker

as the preferred service. The app will ask to access the

camera to scan the device's QR code. If you don't allow

this you can manually type the IMEI code found on the

Tracker box. If you allow access, just highlight the QR

code on the device to auto-register it (fig. 3).

Power on the device

The device is slightly charged upon delivery. To power it

on for the first time, push the button in the middle of the

Automile logo. The first time the device powers on, the

LED turns red while connecting to the network. If there

is an error preventing connection within 15 minutes, the

device stops the attempt to save battery and tries again

later. This happens only once to avoid any blinking lights

ENGLISH

you don't

that could draw a thief's attention. Turning off the device

fig. 1

completely can only be done from the app.

Installing the device

Install Tracker with the zip-ties, screws or tape.

Basic app settings

When you register a device, all settings are set to default.

Depending on what you track, a few settings are more

important than others to understand. To change settings,

open the main menu, select Assets and swipe left on

the tracker you want to edit. Then tap the Edit button to

access the Settings view.

fig. 2

Equipment type

Select the type of your equipment to automatically

calibrate the tracker's built-in motion sensor (fig. 4). Add a

custom name and photo if you wish.

Update interval

Set the tracker's update interval (fig. 5) to 30 sec, 1 min,

2 min, 3 min, 5 min, 10 min, 30 min, 1 h, 6 h, 12 h or 1 day. A

short update interval equals a high tracking frequence, but

increased battery consumption. We recommend update

intervals of 5 or 10 min. Shorter times are recommended

only if the device is running on external power.

fig. 3

Sleep interval

The sleep interval (fig. 5) is by default set to Never sleep;

the device will actively start tracking when movement

is detected. To extend battery time you can select a

ENGLISH

fig. 4

fig. 5