Automotive Tazer JL Mini User Manual - Page 13
Browse online or download pdf User Manual for Diagnostic Equipment Automotive Tazer JL Mini. Automotive Tazer JL Mini 14 pages. For jeep wrangler jl & gladiator jt 2018-2020
Print PageAny of the 8 light shows
backup cameras
Line Lock
Rock Crawl
TC Kill
Cooldown
Front/Rear/Front+Rear Lockers
SwayKill
Keep in mind that not all functions
pertain to all vehicles. These remap
buttons will only program and operate
while Cruise Control is OFF. When
Configuration of the Tazer is accomplished by using the supplied USB cable connected
to a PC or Mac, using the ZPU Programming Utility. The ZPU User Guide explains how
to install ZPU and how to perform firmware updates.
USB cable, you can replace it with any common "USB Mini B" data/charging cable.
Please see the accompanying "Light Show Configuration Guide" to configure your
When you select "Unmarry" from the Tazer menu, all of your settings will revert to whatever they were when
you originally Married your Tazer.
If you receive a Tazer second-hand, or lose access to your vehicle without unmarrying your Tazer and
receive the
"Not VIN XXXX"
1. Navigate to the "UM Key" item in the Tazer's EVIC menu, described on
2. Write this key down, and visit this URL to purchase our Unmarry Service, where you'll be prompted to
enter that key:
https://www.zautomotive.com/product/unmarry-key/
3. Return to the UM Key option in the EVIC menu and hit (Left Arrow + Cruise+/-) to begin entering the
code provided with your purchase.
4. Press Left + Cruise On/Off to proceed to the next character.
5. Once you've entered the last (eighth) digit, your Tazer will report whether the unmarry has succeeded or
failed.
Configuration
Tazer's light show options.
The Unmarry Key
error:
Cruise is on, they will operate as normal
cruise control buttons. For TC Kill, a
vehicle restart is required to bring the
system back to normal. For Lockers, the
normal Locker off button disengages
the lockers.
• Partial Reboot: Press left arrow and
cruise RES with the ignition set to
RUN and engine is not running, and
the Tazer will reset several systems
including the PCM (engine adaptives),
RF Hub, Instrument cluster, ABS, BCM.
If you misplace or damage your
page
10.
13