Automotive Tazer JL Mini Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature diagnostiche Automotive Tazer JL Mini. Automotive Tazer JL Mini 14. For jeep wrangler jl & gladiator jt 2018-2020

Stampa la pagina

Any of the 8 light shows

backup cameras

Line Lock

Rock Crawl

TC Kill

Cooldown

Front/Rear/Front+Rear Lockers

SwayKill

Keep in mind that not all functions

pertain to all vehicles. These remap

buttons will only program and operate

while Cruise Control is OFF. When

Configuration of the Tazer is accomplished by using the supplied USB cable connected

to a PC or Mac, using the ZPU Programming Utility. The ZPU User Guide explains how

to install ZPU and how to perform firmware updates.

USB cable, you can replace it with any common "USB Mini B" data/charging cable.

Please see the accompanying "Light Show Configuration Guide" to configure your

When you select "Unmarry" from the Tazer menu, all of your settings will revert to whatever they were when

you originally Married your Tazer.

If you receive a Tazer second-hand, or lose access to your vehicle without unmarrying your Tazer and

receive the

"Not VIN XXXX"

1. Navigate to the "UM Key" item in the Tazer's EVIC menu, described on

2. Write this key down, and visit this URL to purchase our Unmarry Service, where you'll be prompted to

enter that key:

https://www.zautomotive.com/product/unmarry-key/

3. Return to the UM Key option in the EVIC menu and hit (Left Arrow + Cruise+/-) to begin entering the

code provided with your purchase.

4. Press Left + Cruise On/Off to proceed to the next character.

5. Once you've entered the last (eighth) digit, your Tazer will report whether the unmarry has succeeded or

failed.

Configuration

Tazer's light show options.

The Unmarry Key

error:

Cruise is on, they will operate as normal

cruise control buttons. For TC Kill, a

vehicle restart is required to bring the

system back to normal. For Lockers, the

normal Locker off button disengages

the lockers.

• Partial Reboot: Press left arrow and

cruise RES with the ignition set to

RUN and engine is not running, and

the Tazer will reset several systems

including the PCM (engine adaptives),

RF Hub, Instrument cluster, ABS, BCM.

If you misplace or damage your

page

10.