ADENDORFF MAC AFRIC SDRILC-005 Original Operating Instructions - Page 11
Browse online or download pdf Original Operating Instructions for Power Screwdriver ADENDORFF MAC AFRIC SDRILC-005. ADENDORFF MAC AFRIC SDRILC-005 14 pages. Cordless brushless driver/hammer drill
Print Page
a) Remove the battery from the tool when it is worn out.
b) Wrap the terminals with a strong tape to avoid short-circuit and electric leakage.
Never attempt to disassemble or disembowel the battery!
MAINTENANCE AND INSPECTION
Inspecting
When the tool is distributed or withdrew, the custodial staff must give it a daily inspection;
before use, users must give it a daily inspection; the companies using the tool must have
professionals to inspect the tool regularly; Inspection cycle should be shortened in the area
of humid climate and changeable temperature or under poor using conditions; Inspect in
time before rainy season.
The tool that is inspected to be qualified should be marked with a sticker on which there are
words "identifier, name or identification of the inspecting company, name or identification of
the inspector and effective date.
The tool must be maintained by maintenance companies recognized by original
manufacturer. The end-users and maintenance departments are not allowed to change
original parameter of the tool, or adopt alternate materials whose performance is lower than
original ones or spare parts that don not correspond to the specifications.
Cleaning Ventilation Slots
For safe and proper working, always keep the power tool and its ventilation slots clean. Use
a soft, clean and dry brush to clean the ventilation slots regularly or when they're clogged.
Inspecting the Mounting Screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should
any of the screws be loose, retighten them immediately. Failure to do so could result in
serious hazard.
Cleaning
Only use soft and dry cloth to wipe the body of the tool. Do not clean the tool with wet cloth,
thinner, gasoline or other volatile solvents.
※ To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by authorized service centers, always using original
replacement parts.