909 EDG4 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Lawn Mower 909 EDG4. 909 EDG4 13 pages. 1200w lawn edger

Print Page

IMPORTANT: READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

WARNING.

When using the machne the safety rules must

be followed. For your own safety and bystanders please

read these instructions before operating the machine.

Please keep the instructions safe for later use.

SAVE THESE INSTRUCTIONS

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not

play with the appliance.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

Safe operating practices

Training

a) Read the instructions carefully.

controls and fhe proper use of fhe machine.

b) Never allow people unfamiliar with these instructions

or children to use the machine.

restrict the age of the operator.

c) Keep in mind that the operator or user is responsible

for accidents or hazards occurring to other people or

their property.

Preparation

a) Before use, check the supply and extension cord

for signs of damage or aging.

damaged during use, disconnect the cord from the supply

immediately. DO NOT TOUCH THE CORD BEFORE

DISCONNECTING THE SUPPLY. Do not use the

appliance if the cord is damaged or worn.

Be familiar with fhe

Local regulations can

If the cord becomes

b) Never operate the machine while people, especially

children, or pets are nearby.

c) Wear eye protection and covered shoes at all times

while operating the machine.

Operation

a) Keep supply and extension cords away from tuning

means.

b) Use the machine only in daylight or good artificial

light.

c) Never operate the machine with damaged guards or

shields or without guards of shields in place.

d) Switch on the motor only when the hands and feet are

away from the tuning means.

e) Always disconnect the machine from the power

supply:

Whenever leaving the machine unattended and

before clearing a blockage, before checking, cleaning or

working on the machine, after striking a foreign object

and whenever the machine starts vibrating abnormally.

f) Take care against injury to feet and hands from the

cutting means.

g) Always ensure that the ventilation openings are kept

clear of debris.

Maintenance and storage

a) Disconnect the machine from the power supply

before carrying out maintenance or cleaning work.

b) Use only the manufacturer's recommended

replacement parts and accessories.

c) Inspect and maintain the machine regularly.

machine repaired only by an authorized repairer.

d) When not in use store the machine out of the reach

of children

Recommendation

a) The appliance should be supplied via a residual

current device (ReO) with a tripping current of not

more than 30 rnA.

Have the