909 EDG4 Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin Pemotong Rumput 909 EDG4. 909 EDG4 13 halaman. 1200w lawn edger
Halaman CetakIMPORTANT: READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
WARNING.
When using the machne the safety rules must
be followed. For your own safety and bystanders please
read these instructions before operating the machine.
Please keep the instructions safe for later use.
SAVE THESE INSTRUCTIONS
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Safe operating practices
Training
a) Read the instructions carefully.
controls and fhe proper use of fhe machine.
b) Never allow people unfamiliar with these instructions
or children to use the machine.
restrict the age of the operator.
c) Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
a) Before use, check the supply and extension cord
for signs of damage or aging.
damaged during use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the
appliance if the cord is damaged or worn.
Be familiar with fhe
Local regulations can
If the cord becomes
b) Never operate the machine while people, especially
children, or pets are nearby.
c) Wear eye protection and covered shoes at all times
while operating the machine.
Operation
a) Keep supply and extension cords away from tuning
means.
b) Use the machine only in daylight or good artificial
light.
c) Never operate the machine with damaged guards or
shields or without guards of shields in place.
d) Switch on the motor only when the hands and feet are
away from the tuning means.
e) Always disconnect the machine from the power
supply:
Whenever leaving the machine unattended and
before clearing a blockage, before checking, cleaning or
working on the machine, after striking a foreign object
and whenever the machine starts vibrating abnormally.
f) Take care against injury to feet and hands from the
cutting means.
g) Always ensure that the ventilation openings are kept
clear of debris.
Maintenance and storage
a) Disconnect the machine from the power supply
before carrying out maintenance or cleaning work.
b) Use only the manufacturer's recommended
replacement parts and accessories.
c) Inspect and maintain the machine regularly.
machine repaired only by an authorized repairer.
d) When not in use store the machine out of the reach
of children
Recommendation
a) The appliance should be supplied via a residual
current device (ReO) with a tripping current of not
more than 30 rnA.
4
Have the