DynaQuip WaterCop LEAK STOP+ Owner's Manual And Installation Manual - Page 8
Browse online or download pdf Owner's Manual And Installation Manual for Control Unit DynaQuip WaterCop LEAK STOP+. DynaQuip WaterCop LEAK STOP+ 13 pages.
Print Page
Operating Instructions
+
is capable of providing two alarm relay connections (dry contact
Leak Stop
closures or 12 VDC signal) to report current valve position. When water is
detected by one of the sensors; the valve will close, the audible alarm will
sound, the indicator lights will display CLOSED, and the alarm relays will
activate. An auxiliary powered device, such as buzzer, lights, alarm, etc., can
be triggered from this output signal. See drawing below for wiring instructions.
DRY CONTACT
OUTPUT SIGNAL
+
POWER SUPPLY
MAX .25A (250mA)
AUX DEVICE
-
12 VDC LIVE
OUTPUT SIGNAL
-
12 VDC
AUX DEVICE
+
To silence the alarm, press one of the buttons on the face of the actuator.
After the leak is repaired, press the open button, the valve will open and the
system will return to normal.
8
WATER PROBE
WATER PROBE
JUMPER IS SET FOR DRY CONTACT
ALARM OUTPUT SIGNAL
CONNECT TO COM1 AND NO1
OUTPUT TERMINALS
JUMPER IS SET FOR 12 VDC LIVE
ALARM OUTPUT SIGNAL
CONNECT TO GND AND COM2
OUTPUT TERMINALS