Autonics LE4SA Instruction - Page 15
Browse online or download pdf Instruction for Timer Autonics LE4SA. Autonics LE4SA 18 pages. Din w48xh48mm digital backlight lcd timer
Also for Autonics LE4SA: Manual (17 pages)
Print Page
LE4S Series
LE4SA Output operation mode
Mode
Time chart
[
]
INT
Instantaneous contact
Interval
1. Time limit output will be ON when power is ON and Timing operation starts.
2. Time limit output will be OFF when timing operation is progressed up to the setting time. Display value will be
3. If selecting time limit 1c + instantaneous 1c mode, instantaneous output will be ON when power is ON and
4. If pressing RESET key, display value and time limit output will be reset.
[
]
-
Star-Delta
(Output will be set
automatically
1.
as Time limit 2c)
2.
Timing operation will be reset and started again.
3.
Display value will be HOLD.
4. If pressing RESET key, display value and
5. It is able to set each T1 and T2 time separately.
[
]
T
T1 contact(⑧-⑥)
T2 contact(①-③)
Twin
(Output will be set
automatically
as Time limit 2c)
1. T1 contact will be ON when power is ON and Timing operation starts.
2. T1 contact will be OFF and T2 contact will be ON when timing operation is progressed up to the T1 setting
3. If pressing RESET key, display value and T1, T2 contacts will be reset.
4. It is able to set each T1 and T2 time separately.
[
]
TⅠ
Twin 1
(Output will be set
automatically
as Time limit 2c)
1. Timing operation starts when power is ON.
2. T1 contact will be ON when timing operation is progressed up to the T1 setting time. Timing operation will be
3. T2 contact will be ON when timing operation is progressed up to the T2 setting time. Display value will be
4. If pressing RESET key, display value and T1 and T2 contacts will be reset.
5. It is able to set each T1 and T2 time separately.
※ Initial status : UP mode-display value is "0", output is "OFF". DOWN mode-display value is "setting time", output is "OFF".
※ Instantaneous contact(OUT2) will be returned when power is off.
※ RESET key is locked for default set and release the lock to use.
K-34
T
POWER
※ RESET
Time limit contact
(⑧-⑥)
(①-③)
Set time
UP
0
Set time
DOWN
0
HOLD.
goes OFF when power is OFF.
T1
T2
POWER
※ RESET
contact(⑧-⑥)
contact(①-③)
T1
Set time
T2
0
UP
T1
Set time
T2
DOWN
0
contact will be ON when power is ON and Timing operation starts.
contact will be OFF when timing operation is progressed up to the T1 setting time.
contact will be ON when timing operation is progressed up to the T2 switching time.
T1
T2
POWER
※ RESET
T1
Set time
T2
UP
0
Set time T1
T2
DOWN
0
time. Timing operation will be reset and started again. T2 contact will be OFF when timing operation is pro-
gressed up to the T2 setting time. Display value will be HOLD.
T1
POWER
※ RESET
T1 contact(⑧-⑥)
T2 contact(①-③)
T1
Set time
T2
UP
0
Set time T1
T2
DOWN
0
reset and started again.
HOLD.
Rt
T
Rt
-
contacts will be reset.
Rt
T1
T2
T2
Ta
Rt
Rt : Reset time(Min. 500ms)
Operation
T
POWER
Time limit
contact
output
T = set time
T1
T2
POWER
contact
contact
※ T1 : set time
T2 : switching time
T1
POWER
T1 contact
T2 contact
T1, T2 = set time
Enables to set T1 and T2
time same or differently
T1
T2
POWER
T1 contact
T2 contact
T1, T2 = set time
Enables to set T1 and T2
time same or differently
T
T1
T2
( - switching time)
T1
T2
T1
T2