iHealth BP5 Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Blood Pressure Monitor iHealth BP5. iHealth BP5 4 pages. Wireless blood pressure monitor
Also for iHealth BP5: Owner's Manual (17 pages), Owner's Manual (13 pages), Quick Start Manual (5 pages)
Print Page
Charge Battery Before First Use
Connect the monitor to a USB port using the charging cable provided until the green indicator
light stabilizes.
Connect to iOS Device via Bluetooth
•
Apply the cuff or press the START/STOP button, the Bluetooth indicator will begin
flashing.
•
Turn Bluetooth "On" under the "Settings" menu on the iOS device.
•
Wait until the model name printed on the monitor, (i.e. "BP5 xxxxxx") and "Not Paired"
appear in the Bluetooth menu, and select the model name "BP5 xxxxxx" to pair and
connect. The Bluetooth indicator will remain steady upon successful connection.
When using the monitor for the first time, it may take up to 30 seconds for your iOS
device to detect the Bluetooth signal.
•
Each subsequent time you use the monitor, "Not Connected" will be displayed next to
"BP5 xxxxxx" in the Bluetooth Menu.
•
Please repeat these steps when you switch to another iOS device with the monitor.
Monitor Status
Waiting to connect
Connected and measurement in progress
Measurement completed and ready to disconnect
Measurement Procedures
Blood pressure can be affected by the position of the cuff and your physiologic condition. It is
very important that the cuff should be placed at the same level as your heart.
Bluetooth Indicator
Flashing blue light
Steady blue light
Gradually extinguishing light