iHealth BP5 Quick Start Manual - Page 3
Browse online or download pdf Quick Start Manual for Blood Pressure Monitor iHealth BP5. iHealth BP5 4 pages. Wireless blood pressure monitor
Also for iHealth BP5: Owner's Manual (17 pages), Owner's Manual (13 pages), Quick Start Manual (5 pages)
Print Page
Body Posture
Sitting During Measurement
a. Be seated with your feet flat on the floor without crossing your legs.
b. Place your hand, palm-side up, in front of you on a flat surface such as a desk or
a table.
c. The middle of the cuff should be at the level of the right atrium of your heart.
Lying Down During Measurement
a. Lie on your back.
b. Place your arm straight along your side with your hand palm-side up.
c. The cuff should be placed at the same level as your heart.
Apply the Cuff
a. Pull the cuff end through the metal loop, positioning it outward (away from your
body).
b. Place a bare arm through the cuff and position the cuff 1/2"(1-2cm) above the
elbow joint.
c. Tighten the cuff by pulling it towards your body, securing it closed with the
Velcro fastener.
d. While seated, place your hand, palm-side up, in front of you on a flat surface
such as a desk or table. Position the monitor in the middle of your arm so that it
is aligned with your middle finger.
Remember to:
1.
Stay still during measurement. Do not move your arm, body or the monitor.
2.
Stay still and calm for one to one and half minutes before taking a blood pressure measurement.
Prolonged over-inflation of the bladder may cause ecchymoma of your arm.
During measurement, press the "START/STOP" button to stop measurement. Press the
"START/STOP" button for 2 seconds to turn off the monitor manually.
Auto Connect Option
Auto connect option allows the monitor to find the last used iOS device and re-establish the
connection automatically. Auto connect option can be enabled in the App. (Device
Setting->Auto Connect->On)