Autopage C3-RS-730 LCD Operation Manual - Page 6

Browse online or download pdf Operation Manual for Car Alarm Autopage C3-RS-730 LCD. Autopage C3-RS-730 LCD 18 pages. Professional 2-way lcd remote car starter & alarm system with built in temperature, voltage sensor and two-way serial port data link

Autopage C3-RS-730 LCD Operation Manual
SVMASTER -
TAMPER DISARMING : If the alarm is triggered, upon disarm the system's siren will chirp 4 times, and the
parking lights will flash 3 times telling you the alarm has been triggered during the last armed state.
PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights
"ON" for 30 seconds and for 10 seconds upon the lock signal. (Programmable)
TWO STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver's door only when
disarming the security system. Pushing the
doors.
AUTOMATIC RE-ARM : If this feature is selected, the security system will automatically re-arm itself in 60
seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened before
the 60 seconds timer has elapsed.
H. DISARMING WITHOUT A TRANSMITTER
OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE:
The Override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to the 'ON' position.
2. (Alarm will sound.)
3. Within 10 seconds push and release the valet switch. The alarm will stop sounding and enter the disarm
mode. You can now start and operate the vehicle normally.
OVERRIDE THE ALARM WITH PASSWORD PIN CODE:
Unlike valet switch that can easily be found and defeated, this security system allows the consumer t o
program a password pin code offering a higher level of security.
1. Enter the vehicle and turn the ignition switch to 'ON' position. (Alarm will sound.)
2. Within 5 seconds, enter your chosen first digit code by pressing and releasing the Valet Switch. (When
finished above procedures, system's siren will stop alarming, lights will stop flashing, but the vehicle
can't be started.)
3. Within 15 seconds of the last digit code enter (the 1st code), then turn the Ignition Switch "OFF" and then
"ON".
4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the Valet Switch.
5. Turn the ignition switch "OFF" position. 4 Chirps from siren/horn and 3 flashes from the parking light
indicate the system has disarmed.
Note: You must override the alarm within 60 seconds. If not, the system will automatically re-arm.
EXAMPLE: To Override the System with the Password Code 83,
1. Enter the vehicle and turn the ignition switch to the 'ON' position.
(Alarm will sound.)
2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When finished the system's siren will
stop alarming, lights stop flashing, but the vehicle cannot be started or driven away.)
3. Within 15 seconds of entering the last digit code enter (the 1
"ON".
4. Within 15 seconds, Press and Release the Valet Switch 3 times.
5. Turn the Ignition Switch to the "Off" position. 4 Chirps form siren/horn and 3 flashes from the parking lights
will indicate the system has disarmed.
I.

VALET MODE:

VALET MODE:
(System is in Disarm Mode )
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your
transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm
functions and remote start functions are bypassed, however, the remote panic feature and remote door
SVMASTER -
http://www.msvmaster.lv
-
button a second time within 3 seconds will unlock the other
(Factory Default Setting)
st
code), turn the Ignition Switch "Off" and then
6
-
http://www.msvmaster.lv