Dynasty EF67B Series Owner's Installation Instructions & Operating Manual - Page 5

Browse online or download pdf Owner's Installation Instructions & Operating Manual for Indoor Fireplace Dynasty EF67B Series. Dynasty EF67B Series 8 pages. Wall mounted electric fireplace

Print Page

INSTALL YOUR FIREPLACE

Install your fireplace：：：：

Open the box and take out the wall mounting bracket.

Choose a solid and plain wall and then put the bracket on the position where you want to install the fireplace. Mark the 4

holes by a pen from the holes on the bracket. (Fig. 2)

Drill the marked position using a suitable sized drill bit for the chosen fixings.

Take away the bracket and then drill 4pcs Φ8 holes on the wall. Put the plastic wall plug into the hole. (Fig. 3) If the wall is

solid wood, it is no needed to drill the holes on the wood and no needed of the plastic wall plug.

Fix the bracket by 4pcs 5×40 screws (Fig. 4)

Hang the fireplace on the hooks at top and push the fireplace into the bracket and then fix it by 2pcs M5×10 screws. (Fig. 5)

For pebbles version, arrange the white & clear faux stones along the inset window ledge at the front of the firebox.

Install the fireplace front as picture. (Fig. 6) Fix the fireplace front by 2pcs M4×8 screws

Fig. 4

A 15 AMP, 120 Volt, 60 Hz circuit with a properly grounded outlet is required. The unit comes standard with 6 feet (1.8 m)

three wire cord, exiting from the rear of the fireplace. Plan the installation to avoid the use of an extension cord. Preferably,

the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or

the fuse to blow when the heater is in operation.

Fig. 2

ELECTRICAL CONNECTION

Fig. 5

Fig. 3

Fig. 6