Emerson PACSystems RX3i Quick Start Manual - Page 13
Browse online or download pdf Quick Start Manual for Measuring Instruments Emerson PACSystems RX3i. Emerson PACSystems RX3i 19 pages. Canopen master
Also for Emerson PACSystems RX3i: Quick Start Manual (18 pages)
Print Page
Quick Start Guide
GFK-2837A
▪
PACSystems RX3i CANopen Master Module User's Manual,
GFK-2831, available from
Automation-Controls/support.
Two steps are required to configure the IC695CNM001 module
as a master on a CANopen network:
Configure the CANopen network using SYCON.net and download
1.
the configuration to the CNM001 module through the USB port.
The CNM001 master module must be configured as node 1. The
slave devices are configured as nodes under the master module.
Notes:
If the Configuration command is unavailable when you right click
the node containing the CANopen Master, you must first select
Disconnect, and then select Configuration.
In the CANopen Master configuration screen, make sure the
netXDriver device driver is the only driver selected. Clear all other
driver selections.
Configuration
https://www.emerson.com/Industrial-
Section 3
Sep 2019
9