autoright C800896 Manual - Page 3

Browse online or download pdf Manual for Sander autoright C800896. autoright C800896 16 pages. Electric, 7 and 10 inch random orbital all-purpose buffer

Print Page

GENERAL SAFETY RULES

READ AND UNDERSTAND BEFORE USING

!WARNING! Read and understand the user

manual instructions. Failure to follow all

instructions listed below may result in electric

shock, fire and/or serious personal injury.

WORK AREA

1. Keep work area clean and well lit.

Cluttered benches and dark areas invite

accidents.

2. Do not use power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks, which may ignite the

dust and fumes.

3. Keep bystanders, children and visitors

away while operating a power tool.

Distractions can cause you to lose control.

PERSONAL SAFETY

1. Stay alert, watch what you are doing,

and use common sense when operating

a power tool. Do not use tool while tired

or under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

2. Dress properly. Do not wear loose clothing

or jewelry. Keep hair, clothing and gloves

away from moving parts. Loose clothes,

jewelry, or long hair can be caught in

moving parts.

3. Avoid accidental starting. Be sure switch is

in the OFF position before plugging into a

receptacle. Carrying tools with your finger

on the switch invites accidents.

4. Use safety equipment. Always wear eye

protection. Dust mask, non-skid safety

shoes, hardhat or hearing protection must

be used for appropriate conditions.

5. To reduce the risk of electric shock, do not

expose to water or rain. Store indoors.

Household use only. Read Instruction

manual before operating.

IMPORTANT SAFEGUARDS

TOOL USE AND CARE

1. Prevent Surface Damage: Always use a

2. Use clamps or other practical ways to

3. Do not force tool. Use the correct tool for

4. Do not use tool if switch does not turn on

5. Store idle tools out of reach of children

6. Check for misalignment or binding of

7. Use only accessories that are recommended

clean bonnet with each project. Before

beginning, check bonnet or pad for foreign

elements, dirt and debris. Dirt and debris

can cause damage to the surface of

a vehicle.

secure and support the work piece to a

stable platform. Holding the work by hand

or against your body is unstable and may

lead to loss of control.

your application. The correct tool will do

the job better and safer at the rate for

which it is designed.

or off. A tool that cannot be controlled

with the switch is dangerous and must be

repaired.

and other untrained persons. Tools are

dangerous in the hand of untrained users.

moving parts, breakage of parts, and

any other conditions that may affect the

tool's operation. If damaged, have the tool

serviced before using. Many accidents are

caused by poorly maintained tools.

by your model's manufacturer. Accessories

that may be suitable for one tool may

create an injury risk when used on

another tool.

ENGLISH