autoright C800896 Podręcznik - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik dla Sander autoright C800896. autoright C800896 16 stron. Electric, 7 and 10 inch random orbital all-purpose buffer
Drukuj stronęGENERAL SAFETY RULES
READ AND UNDERSTAND BEFORE USING
!WARNING! Read and understand the user
manual instructions. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious personal injury.
WORK AREA
1. Keep work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
2. Do not use power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks, which may ignite the
dust and fumes.
3. Keep bystanders, children and visitors
away while operating a power tool.
Distractions can cause you to lose control.
PERSONAL SAFETY
1. Stay alert, watch what you are doing,
and use common sense when operating
a power tool. Do not use tool while tired
or under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
2. Dress properly. Do not wear loose clothing
or jewelry. Keep hair, clothing and gloves
away from moving parts. Loose clothes,
jewelry, or long hair can be caught in
moving parts.
3. Avoid accidental starting. Be sure switch is
in the OFF position before plugging into a
receptacle. Carrying tools with your finger
on the switch invites accidents.
4. Use safety equipment. Always wear eye
protection. Dust mask, non-skid safety
shoes, hardhat or hearing protection must
be used for appropriate conditions.
5. To reduce the risk of electric shock, do not
expose to water or rain. Store indoors.
Household use only. Read Instruction
manual before operating.
IMPORTANT SAFEGUARDS
TOOL USE AND CARE
1. Prevent Surface Damage: Always use a
2. Use clamps or other practical ways to
3. Do not force tool. Use the correct tool for
4. Do not use tool if switch does not turn on
5. Store idle tools out of reach of children
6. Check for misalignment or binding of
7. Use only accessories that are recommended
clean bonnet with each project. Before
beginning, check bonnet or pad for foreign
elements, dirt and debris. Dirt and debris
can cause damage to the surface of
a vehicle.
secure and support the work piece to a
stable platform. Holding the work by hand
or against your body is unstable and may
lead to loss of control.
your application. The correct tool will do
the job better and safer at the rate for
which it is designed.
or off. A tool that cannot be controlled
with the switch is dangerous and must be
repaired.
and other untrained persons. Tools are
dangerous in the hand of untrained users.
moving parts, breakage of parts, and
any other conditions that may affect the
tool's operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
by your model's manufacturer. Accessories
that may be suitable for one tool may
create an injury risk when used on
another tool.
ENGLISH
3