CopperOptics PairGain PG-Flex FRE-765 List 5 Manual - Page 11
Browse online or download pdf Manual for Remote Control CopperOptics PairGain PG-Flex FRE-765 List 5. CopperOptics PairGain PG-Flex FRE-765 List 5 20 pages. Remote terminal enclosure
Also for CopperOptics PairGain PG-Flex FRE-765 List 5: Manual (8 pages)
Print Page
Revision 01
Table 9. HDSL, Metallic Bypass, and Auxiliary Power Line Unit Termination
Backplane
6 Pair Cable
Connector
Stub (Lists
4D, 4E)
HDSL_1_T
WH/BL
HDSL_1_R
BL/WH
HDSL_2_T
WH/OR
HDSL_2_R
OR/WH
BYPASS_T
WH/GN
BYPASS_R
GN/WH
PWR_1_T
WH/BN
PWR_1_R
BN/WH
PWR_2_T
WH/SL
PWR_2_R
SL/WH
(Spare)
RB/BL
(Spare)
BL/WH
Connector
-48V
GND
CHASSIS GND*
* Where The FRE-765 is shipped with the "CHASSIS GND" wire-wrap post
connected to the adjacent "GND" wire-wrap post on the RT Backplane.
PG-Flex FRE-765
June 2, 1997
Type
Function
AMP Quiet
Tip and Ring terminations for HDSL Pair #1 from the COT. -130 Vdc
Front
is simplexed on this line for powering the RT.
AMP Quiet
Tip and Ring terminations for HDSL Pair #2 from the COT. +130
Front
Vdc is simplexed on this line for powering the RT.
AMP Quiet
Tip and Ring terminations for the metallic bypass pair to the COT.
Front
(Note: Do not connect metallic bypass pairs between PG-Flex systems
or between other DLC systems.)
AMP Quiet
Termination for auxiliary power pairs when using a PG-Flex doubler
Front
unit. Note that these connectors must be ordered separately (PN 150-
1399-25).
AMP Quiet
Termination for auxiliary power pairs when using a PG-Flex doubler
Front
unit. Note that these connectors must be ordered separately (PN 150-
1399-25).
(No connection. For future use.)
(No connection. For future use.)
Table 10. Power and Ground Line Unit Terminations
Type
Screw
Screw
Screw
Table 11. Fuse
Fuse
Type
Function
F1
GMT 2A
(Not required - Future)
PairGain Engineering - Plant Series
Function
(No Connection - Future)
(No Connection - Future)
Chassis Ground
Section 363-765-105
Page 9