Galvin Engineering CliniMix CP-BS WM-TMVPMB Product Installation Manualline - Page 13
Browse online or download pdf Product Installation Manualline for Plumbing Product Galvin Engineering CliniMix CP-BS WM-TMVPMB. Galvin Engineering CliniMix CP-BS WM-TMVPMB 18 pages. Hob mounted thermostatic progressive basin mixer - lever
Print Page
11.0
DISINFECTION
Swapping the hoses allows an engineer to feed water from the hot water source into the cold inlet. This hot water then passes
through the cold inlet, the thermostatic mixing chamber and out through the mixed water outlet.
Safety Note: Care should be taken when carrying out the following procedure to avoid contact with hot water and hot
surfaces. We recommend the use of protective hand wear.
1. Isolate water supply
Turn both handles clockwise until they're fully off.
3. Swap Hoses
Swap the hoses. Attach the cold hose on the hot outlet and the hot hose on the cold outlet.
Turn the hot inlet tap anti-clockwise to enable hot water flow.
2. Remove hoses
Using a spanner, turn both hose nuts anti-clockwise
and remove.
13
Version 2, 29 May 2020, 13 of 18