Dynex DX-TVM113 Assembly Manual - Page 6

Browse online or download pdf Assembly Manual for TV Mount Dynex DX-TVM113. Dynex DX-TVM113 13 pages. Slim-profile tv wall mount
Also for Dynex DX-TVM113: Quick Setup Manual (2 pages)

Print Page

DX-TVM113

STEP 2 - Option 2: Installing on a solid concrete* or concrete block wall

CAUTION:

directly onto the concrete surface.

1 Align the wall plate template (R) at the height you determined in the previous step, make sure that it is level,

then tape it into place. Use a pencil to mark the lag bolt hole locations (4). Remove the wall plate template.

2 Drill pilot holes to a depth of 2.5 in. (63.5 mm) using a 1/2 in. (13 mm) diameter masonry drill bit.

3 Insert the concrete wall anchors (Q) into the pilot holes and use a hammer to make sure the anchors are flush

with the concrete surface.

4 Align the wall plate (A) with the anchors, insert the lag bolts (P) through the lag bolt washers (O), then

through the holes in the wall plate. Tighten the lag bolts only until they are firm against the wall plate.

CAUTION:

• Avoid potential injuries or property damage!

• DO NOT over-tighten the lag bolts (P).

* Minimum solid concrete thickness: 8 in. (203mm)

* Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm).

* Minimum horizontal spacing between fasteners cannot be less

than 16" (406 mm).

You'll need

P (4)

Q (4)

Top

Haut

Parte superior

Tools Needed

Outils nécessaires

Herramientas requeridas

http://san.us/286

O (4)

To prevent property damage or personal injury, never drill into mortar between blocks. Mount wall plate

Wall plate (A)

DX-TVM113 Wall Plate Template • Gabarit • Plantilla

Top

Haut

Parte superior

Note: For wood frame installations, use a stud finder to locate wood

studs first.

Remarque : Pour une construction à ossature de bois, localiser

d'abord les montants en bois, à l'aide d'un détecteur de montants.

Nota: para la instalación en construcciones de armazón de madera,

primero debe localizar las vigas de madera con un localizador de vigas.

Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.

<FR>Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.

<SP>Need more information about your mount? Scan this QR code or visit www.dynexproducts.com.

V1 13-0140

Wall plate template (R)

Level

Pencil

Hammer

Installation instructions

1/2" masonry

drill bit

Drill

Tape

2.5 in.

(63.5 mm)

1/2" socket

wrench