Dynex DX-TVM113 Assembly Manual - Page 7

Browse online or download pdf Assembly Manual for TV Mount Dynex DX-TVM113. Dynex DX-TVM113 13 pages. Slim-profile tv wall mount
Also for Dynex DX-TVM113: Quick Setup Manual (2 pages)

Print Page

Installation instructions

STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back

1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages

and scratches.

2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV

for instructions.

3 Temporarily lay the TV brackets (B and C) on the back of your TV.

4 Align the screw holes in the TV brackets with the mounting screw holes on your TV.

5 Identify which type of back your TV may have:

• Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when

assembling the wall mount.

• Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need spacers when

assembling the wall mount.

• Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You will need spacers

when assembling the wall mount.

6 Remove the TV brackets.

DX-TVM113