AGS Merlin Installation & Operation Instructions - Page 11
Browse online or download pdf Installation & Operation Instructions for Gas Detectors AGS Merlin. AGS Merlin 16 pages. Refrigerant gas detector tft
Also for AGS Merlin: User & Installation Manual (5 pages), User & Installation Manual (6 pages), Installation & Operation Manual (12 pages)
Print Page
Operation
Initial Power Up - Start Up Sequence
On connecting power, the detector enters 'sensor stabilisation' phase for approximately 60 seconds – during
this period the screen will display an 'initialisation' message indicating that the device is not yet ready for gas
detection. After the sensor has stabilised – the screen will display;
Target gas.
a.
Target gas value.
b.
Target gas measurement (parts per million or % LEL).
c.
Unique detector serial/batch number.
d.
Configured ID number.
e.
Colour Indications
Alarm List
Refrigerant
R134a
Safety Class A1 (ppm)
R410a
Safety Class A1 (ppm)
R32
Safety Class A2L (ppm)
Rev 01
Merlin Gas Detector Installation & Operation Instructions
Pre-Alarm (Low)
▲800
Buzzer
Alarm (High)
No
▲1000
Buzzer
Yes
Continuous Sound
Page 11 of 16