Galvin Specialised Ezy-Drink Lead Safe 316 SS TD15XEM Product Installation Manualline - Page 3

Browse online or download pdf Product Installation Manualline for Plumbing Product Galvin Specialised Ezy-Drink Lead Safe 316 SS TD15XEM. Galvin Specialised Ezy-Drink Lead Safe 316 SS TD15XEM 4 pages. Remote electronic drinking bubbler tap

Print Page

3. Fit Piezo Button



Install piezo button through the trough

ensuring that the coloured washer is in

place.



Fit & tighten the supplied nut.



Connect it to the electronic control unit.

Water

Supply

5. Fit Solenoid and Hose



Fit flexi hose to solenoid and water supply.



Fit flexi hose to outlet.

Version 1, 7 February 2020, Page 3 of 4

4. Install Piezo Button, Solenoid and Transformer



Connect Piezo button, the solenoid & the power supply

to the eletronic control unit.



This unit is supplied with 2 x 3.2 metre extension leads

for connecting to the power supply and solenoid.

6. Testing



Once the drinking tap has been installed and tested

for leaks, the water height may be adjusted to suit the

available pressure.



To adjust water flow

1. Remove the blanking screw.

2. Adjust the water height by turning the regulator

screw.

3. Replace blanking screw.

Note: The full range from minimum flow to

maximum flow is only ¼ turn.