AGS Merlin TFT Installation & Operation Manual - Page 8

Browse online or download pdf Installation & Operation Manual for Gas Detectors AGS Merlin TFT. AGS Merlin TFT 16 pages.

Print Page

Installation & Operation Manual

X Chain ID Switches

When wiring multiple detectors to the

GDP-X range it is important to identify

each detector and in which monitoring

zone the detector is located - for the

GDP-X system to receive and display

accurate data.

The diagram opposite shows how to

configure switches for each detector and

is also printed onto the detector circuit

board for quick reference.

For more information - refer to your GDP-X manual.

The buzzer measures approx. 65dB from a distance of 300mm/1ft (tested in quiet conditions).

Buzzer On/Off Switch

Chain Termination Resistor

Detector ID Switches

AGSDETTFT-IOM Iss: 5 06-20

There is a switch on the detector-TFT board [Buzzer On/Off].

The user can choose whether to have an audible alarm

when dangerous gas levels are detected.

The alarm will continuously sound – there are no provisions to

silence the alarm, gas levels must drop to a safe level for the

alarm to stop.

ON – see 'Audible Alarm Switch'.

OFF – see 'Chain Wiring Example'.

ID 1 – see 'X Chain ID Switches'.

Merlin Gas Detector TFT