HIKOKI SB3608DA Handling Instructions Manual - Page 10

Browse online or download pdf Handling Instructions Manual for Power Tool HIKOKI SB3608DA. HIKOKI SB3608DA 20 pages.

Print Page

REGARDING LITHIUM-ION BATTERY

TRANSPORTATION

When transporting a lithium-ion battery, please observe the

following precautions.

WARNING

Notify the transporting company that a package contains a

lithium-ion battery, inform the company of its power output

and follow the instructions of the transportation company

when arranging transport.

○ Lithium-ion batteries that exceed a power output of

100 Wh are considered to be in the freight classiﬁ cation

of Dangerous Goods and will require special application

procedures.

○ For transportation abroad, you must comply with

international law and the rules and regulations of the

destination country.

Power Output

2 to 3 digit number

USB DEVICE CONNECTION

PRECAUTIONS

When an unexpected problem occurs, the data in a USB

device connected to this product may be corrupted or lost.

Always make sure to back up any data contained in the USB

device prior to use with this product.

Please be aware that our company accepts absolutely no

responsibility for any data stored in a USB device that is

corrupted or lost, nor for any damage that may occur to a

connected device.

WARNING

○ Prior to use, check the connecting USB cable for any

defect or damage.

Using a defective or damaged USB cable can cause

smoke emission or ignition.

○ When the product is not being used, cover the USB port

with the rubber cover.

Buildup of dust etc. in the USB port can cause smoke

emission or ignition.

NOTE

○ There may be an occasional pause during USB

recharging.

○ When a USB device is not being charged, remove the

USB device from the charger.

Failure to do so may not only reduce the battery life

of a USB device, but may also result in unexpected

accidents.

○ It may not be possible to charge some USB devices,

depending on the type of device.

NAMES OF PARTS (Fig. 1–Fig. 17)

Handle knob

Housing

Sanding belt

Guard

Adjust screw

Belt cover

Slide fastener

Dust bag

Duct

Trigger switch

Lock on button

Elbow

Dial

Nameplate

Handle

Battery

Drive pulley

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

SB3608DA: Cordless Belt Sander

To reduce the risk of injury, user must read

instruction manual.

Direct current

Rated voltage

No-load speed

/min

Revolution or reciprocations per minute

Disconnect the battery

Switching ON

Switching OFF

Drive pulley rotation

direction arrow

(marking)

Lever

Idle pulley

Ventilation holes

Motor

Latch

Charge indicator lamp

Arrows on the inside of

the belt

Side of housing

Battery level indicator

switch

Battery level indicator

lamp

Air blow gun

Terminal (Battery)

Sliding grooves

Terminal (Product)

Battery sliding grooves