aireRyder F0069 Manual - Page 5

Browse online or download pdf Manual for Fan aireRyder F0069. aireRyder F0069 9 pages.

Print Page

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION IN

INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED

ELECTRICIAN.

SAVE ALL INSTRUCTIONS.

NOTE: The fan weight is 17.92 lbs (8.13 kg). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failing to do so can result in serious injury.

Installation Steps :

Fig.1

Turn OFF the electric circuit at the

main fuse or circuit breaker box.

Outlet Box

Hanger

Bracket

Chip

Fig.3

Fig.5

Motor Wires

Decorative Cap

Downrod Stand

Cover

Collar

Thread the motor wires through the

downrod stand cover, decorative

cap (Making sure the smooth side

of decorative cap is facing

downward.), canopy and downrod.

Wood Member

(2" x 4" Approx.)

Ceiling

Tighten the hanger bracket to the outlet box with two mounting screws.(Make sure

the outlet box is securely installed so that it will be able to support at least the

fan weight.) Attach the safety cable hook to the ceiling and make sure the safety

cable hook is covered by the fan canopy.

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR

FAN SUPPORT"!

Fig.6

Downrod

Canopy

Hanger Pin

Loosen the collar screws out part way.

Insert the Downrod into the Collar.

Slide Hanger Pin through holes of

Collar and Downrod.

Ceiling Joist

Junction Box

Hanger Bracket

Fig.2

Downrod

Canopy

Decorative Cap

Downrod Stand

Cover

Collar

PAGE: 5 / 9

THE SAFETY

Wood Member

Ceiling Joist

(2" x 4" Approx.)

Ceiling

Safety Cable Hook

Hanger Bracket

Fig.4

Lock Pin

Hanger Pin

Remove the Lock Pin and take off

the Hanger Pin.

Fig.7

Collar Screws

Tighten the two Collar Screws.

Slide Lock Pin into Hanger

Pin until it is locked into position.

Junction Box

Lock Pin

200116