HIKOKI UC 18YSL3 Handling Instructions Manual - Page 12
Browse online or download pdf Handling Instructions Manual for Battery Charger HIKOKI UC 18YSL3. HIKOKI UC 18YSL3 20 pages.
Print Page
English
13. Always use the charger at the voltage specifi ed on the nameplate.
14. Always charge the battery before use.
15. Never use a battery other than that specifi ed. Do not connect a usual dry cell, a
battery other than that specifi ed or a car battery to the power tool.
16. Do not use a transformer containing a booster.
17. Do not charge the battery from DC power supply.
18. Always charge indoors. Because the charger and battery heat slightly during
charging, charge the battery in a place not exposed to direct sunlight; where the
humidity is low and the ventilation is good.
19. Use the exploded assembly drawing on this handling instructions only for
authorized servicing.
PRECAUTIONS FOR CHARGER
1.
Always charge the battery at an ambient temperature of -10–40°C. A temperature of
less than -10°C will result in over charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that of 20–25°C.
2.
Do not use the charger continuously.
When one charging is completed, leave the charger for about 15 minutes before
the next charging of battery.
3.
Do not allow foreign matter to enter the connector for the battery.
4.
Never disassemble the battery or charger.
5.
Never short-circuit the battery.
Short-circuiting the battery will cause a great electric current and overheat. It
results in burn or damage to the battery.
6.
Do not dispose of the battery in fi re.
If the battery is burnt, it may explode.
7.
Using an exhausted battery will damage the charger.
8.
Bring the battery to the shop from which it was purchased as soon as the post-
charging battery life becomes too short for practical use. Do not dispose of the
exhausted battery.
9.
Do not insert objects into the air ventilation slots of the charger.
Inserting metal objects or fl ammable into the charger air ventilation slots will result
in an electrical shock hazard or damage to the charger.
USB DEVICE CONNECTION PRECAUTIONS
When an unexpected problem occurs, the data in a USB device connected to this
product may be corrupted or lost. Always make sure to back up any data contained in
the USB device prior to use with this product.
Please be aware that our company accepts absolutely no responsibility for any data
stored in a USB device that is corrupted or lost, nor for any damage that may occur to a
connected device.
12