HIKOKI UC 18YSL3 Instrukcja obsługi Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi Instrukcja obsługi dla Ładowarka HIKOKI UC 18YSL3. HIKOKI UC 18YSL3 20 stron.

English

13. Always use the charger at the voltage speciﬁ ed on the nameplate.

14. Always charge the battery before use.

15. Never use a battery other than that speciﬁ ed. Do not connect a usual dry cell, a

battery other than that speciﬁ ed or a car battery to the power tool.

16. Do not use a transformer containing a booster.

17. Do not charge the battery from DC power supply.

18. Always charge indoors. Because the charger and battery heat slightly during

charging, charge the battery in a place not exposed to direct sunlight; where the

humidity is low and the ventilation is good.

19. Use the exploded assembly drawing on this handling instructions only for

authorized servicing.

PRECAUTIONS FOR CHARGER

Always charge the battery at an ambient temperature of -10–40°C. A temperature of

less than -10°C will result in over charging which is dangerous. The battery cannot

be charged at a temperature greater than 40°C.

The most suitable temperature for charging is that of 20–25°C.

Do not use the charger continuously.

When one charging is completed, leave the charger for about 15 minutes before

the next charging of battery.

Do not allow foreign matter to enter the connector for the battery.

Never disassemble the battery or charger.

Never short-circuit the battery.

Short-circuiting the battery will cause a great electric current and overheat. It

results in burn or damage to the battery.

Do not dispose of the battery in ﬁ re.

If the battery is burnt, it may explode.

Using an exhausted battery will damage the charger.

Bring the battery to the shop from which it was purchased as soon as the post-

charging battery life becomes too short for practical use. Do not dispose of the

exhausted battery.

Do not insert objects into the air ventilation slots of the charger.

Inserting metal objects or ﬂ ammable into the charger air ventilation slots will result

in an electrical shock hazard or damage to the charger.

When an unexpected problem occurs, the data in a USB device connected to this

product may be corrupted or lost. Always make sure to back up any data contained in

the USB device prior to use with this product.

Please be aware that our company accepts absolutely no responsibility for any data

stored in a USB device that is corrupted or lost, nor for any damage that may occur to a

connected device.