HIKVISION D0T PIR Series User Manual - Page 9
Browse online or download pdf User Manual for Security Camera HIKVISION D0T PIR Series. HIKVISION D0T PIR Series 16 pages. Turbo hd bullet camera
Also for HIKVISION D0T PIR Series: User Manual (17 pages)
Print Page
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the surveillance angle.
Rotation Position
[0° to 360°]
1)
Loosen the No.1 adjusting screw to adjust the pan
position [0° to 360°]. Tighten the No.1 adjusting
screw.
2)
Loosen the No.2 adjusting screw to adjust the
tilting position [0° to 180°]. Tighten the No. 2
adjusting screw.
3)
Loosen the No.3 adjusting screw to adjust the
rotation position [0° to 360°]. Tighten the No.3
adjusting screw.
Ceiling/Wall Mounting with Junction Box
2.2.2
Before you start:
You need to purchase a junction box separately.
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Note:
Drill the cable hole, when adopting ceiling outlet to
route the cable.
3. Take apart the junction box, and align the screw
holes of the bullet camera with those on the
Junction box's cover.
4. Fix the camera on the junction box's cover with
three supplied screws.
Figure 2-12 Install the Junction Box
5. Secure the junction box's body with supplied screws
on the ceiling/wall.
Figure 2-10 3-Axis Adjustment
Figure 2-11 Drill Template
Pan Position
[0° to 360°]
1
Tilt Position [0° to 180°]
2
3
Junction Box
Cover